![]() The system will continue recording until you press stop. Just press record to record video from your cameras. SVAT ELECTRONICS now you can see 5.2 Record Mode Quick Glossary of Recording Terms: Manual Record: This is the simplest of recording modes. Press the channel buttons to switch between full screen camera views To avoid this situation, set the DVR recording mode to OVERWRITE. When the hard disk information icon turns to red, this indicates that the hard drive is full. Press the “INFO” button to display system information and configuration. The onscreen display shows the channel, date, and time. Press the “DISP” button to turn the onscreen display ON or OFF. This is for your security and helps to prevent users from accidentally turni To turn the DVR on and off, use the power switch on your UPS or power bar. We recommend using a surge protected power bar and/or Uninterrupted Power Supply (UPS) backup. Insert the power cord into the power supply. Insert the power supply wire into the rear DC 12V Port on the DVR. Connect the 60ft video/power wire’s male RCA plug to the VIDEO IN port of your TV/ monitor/VCR/DVR. Plug the camera’s power adapter into an AC outlet. Plug the camera’s power supply into the power jack located on the 60ft video/power wire. Match the two arrows on top of both connecting cables. ![]() ![]() Plug the 4 pin DIN female connection on the camera into the 4 PIN DIN male connection on the 60ft video/power wire. SVAT ELECTRONICS now you can see 3.1 Camera Installation 1. Ethernet Port – For connection to your local area network and I BNC Video Output – For connection to your TV/monitor 7. RCA Audio Output – For connection to your TV/monitor 6. RCA Audio Input – For connecting a microphone/audio supported camera (not included) 5. BNC Video Inputs – Connects the cameras to the DVR 2.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |